Sharvin & Co.

Gyproc Easi-Fill®90 is gypsum based powdered jointing compound with a setting time of 90 to 120 minutes.
Gyproc Easi-Fill®90 is designed for Quick Jointing & Finishing of gypsum Boards.

First Coat

• Using an applicator / Trowel, fill the recess formed by the edges of the sheets with Gyproc Easi-Fill®90.
• Centre the Gyproc Paper Tape along the joint and using a Taping knife / Trowel press the tape down into the Easi-Fill®90 ensuring no air bubble remain behind the tape.
• Immediately apply a thin coat of Easi-Fill®90 over the surface of the tape (100-150 mm wide).
• Allow it to dry

Second Coat

• Apply a second coat of Gyproc Easi-Fill®90 with an Applicator / Trowel.
• Ensure that this coat extends outside the area of the first coat (200-250 mm wide).
• Allow to thoroughly dry and scrape back any build-up of compound along the joint.

Third Coat

• Apply a finishing coat of Gyproc Easi-Fill®90 with an Applicator / Trowel
• Joint edges should be feathered at least 50 mm beyond the edges of the previous coat.
• Allow to dry. Lightly sand in the same direction as the joint using finer sandpaper.